Extron electronic IN1608 Switch User Manual


 
IN1606 and IN1608 Series Scaling Presentation Switcher • Installation 14
Power and Input Connections
100-240V ~ -- A MAX
1
2
CONFIGURABLE
HDMI
HDMI
5
6
7
8
C
RS-232IR
RS-232IR
TxRx TxRxG
TxRx Tx RxG
TxRx Tx RxG
HDMI
A
B
3
4
INPUTS
OUTPUTS
TxRx
RS-232
G
LAN
2x25W(8Ω)/2x50W(4Ω)
RESET
AUDIO INPUTS
OUTPUTS
REMOTE
LL1R R
L2
R
L
3
R
CLASS 2 WIRING
L4
R
L5R
+48V
+48V
12
LR
VARIABLE
IN1608 SA
2
MIC/LINE
L6
R
SIG LINK
DTP IN
SIG LINK
DTP IN
SIG LINK
DTP OUT
50/60 Hz
RS-232IR
OVER DTP
OVER DTP
OVER DTP
AMPLIFIED OUTPUT
AB CD EF
A
AC power connector
B
Analog video input connectors
inputs 1 and 2
C
HDMI input connectors
inputs 3-6
D
DTP input and corresponding
RS-232/IR Over DTP connectors
inputs 7 and 8
E
Analog audio input connectors
inputs 1-6
F
Mic/Line connectors — inputs 1 and 2
Figure 8. Power and Input Connectors (IN1608 SA)
A
AC Power connector — Connect the standard IEC power cord from a
100 to 240 VAC, 50-60 Hz power source into this connector. The front panel control
and input selection buttons light in sequence during power-up.
B
Analog video input connectors — Connect video sources to the 15-pin HD
connectors. Each accepts RGB, YUV, RGBcvS, S-video, and composite video (see
Analog Video Wiring on page 19).
C
HDMI input connectors — Connect video sources to the HDMI connectors.
TIP: Use Extron HDMI LockIt Lacing Brackets to secure HDMI cables to the device
(see HDMI Connections on page 21).
D
DTP input connectors (IN1608 Series only) — Connect DTP transmitters to the
DTP IN RJ-45 connectors to send and receive DTP signals over a single twisted
pair cable (see Twisted Pair Recommendations for DTP and HDBaseT
Communication on page 22 for wiring and cable recommendations).
NOTE: Depending on the connected transmitters, the DTP input can travel up to
330 feet (100 meters) or 230 feet (70 meters) without a loss of signal integrity.
The -0x models of the IN1608, IN1608 SA, and IN1608 MA are capable of
DTP 230 transmission.
All other models are capable of DTP 330 transmission.
This connection supports the following:
HDCP-compliant digital video
Embedded digital audio de-embedding from the TMDS source or analog audio
DTP standard RS-232 and IR pass-through signals on associated 5-pole captive
screw connectors.
Remote power to DTP transmitters