Filter
Top Products
Stapler
The only maintenance required for the
Stapler is to load new staple cartridges,
and to clear staple jams if they occur.
Both procedures are explained below.
Loading Staple Cartridges
1 Turn off the mopier and remove the
Left Output Bin.
2 Open the stapler unit cover.
3 Squeeze the stapler cartridge tabs
together and the pull empty staple
cartridge out.
4 Remove the orange plastic shipping
clip from the new staple cartridge.
5 Insert the new staple cartridge until it
snaps into place.
6 Close the stapler unit cover and
replace the Left Output Bin.
2
3
1
7-6 Maintenance and Troubleshooting EN