Filter
Top Products
Drivers for the HP LaserJet 5Si Mopier
Overview
The drivers for the HP LaserJet 5Si Mopier allow you to select mopier
features that may not be supported directly in your software
applications. These features allow you to:
• Staple documents.
• Print watermarks.
• Print multiple page images on a single page (n-Up).
• Print the first page of a document on one type of media and the
remaining pages on another type of media.
• Select the paper on which to print (by source or type).
• Select which output bin to send output to.
• Download fonts to the mopier’s hard disk.
The drivers included with your mopier also support the HP TRANSMIT
ONCE feature. This capability frees your workstation for your use
while multiple copies of your document are printed. The job is only
transmitted once for the requested number of copies, instead of once for
each copy.
Access the drivers directly from your application. The steps needed to
access the drivers will vary from application to application. Typically, it
is accessed from the application’s File menu by selecting Print, then
Printer Options.
To add options to your selected driver, enable them from within the
driver. Accessories must appear in the installed list on the Accessories
tab. For example, if you have physically installed the optional Envelope
Feeder, you still need to make sure it appears in the installed list on the
Accessories tab.
Note To ensure the best mopier performance, and to avoid holding up your
PC or creating network traffic, turn off the collation feature in your
application and turn it on in the driver.
Note If you cannot access an installed accessory in your driver, click the
Accessories tab and make sure the accessory appears in the installed
accessories list. (If you are a Windows 3.1 or 95 client on NetWare 3.x
and your driver is operating bidirectionally, the Accessories tab will not
appear. The driver will automatically detect installed accessories. You
won’t have to manually enable them in the driver.)
To use the Mailbox with Stapler, you need to indicate the operating
mode that was chosen by the administrator. To do this, click the
Accessories tab, select the Mailbox with Stapler from the list of installed
3
Mopier Software
EN Mopier Software 3-3