Filter
Top Products
Paper Trays 1, 2, 3, and 4
You can load a single sheet of paper into Tray 1 or a stack of up to 100
sheets. Tray 1 (multi-purpose) is used for standard and custom paper
sizes, envelopes, labels, and transparencies.
Paper Trays 2 and 3 each hold up to 500 sheets of 20-lb Bond paper.
Tray 4 holds up to 2000 sheets of 20-lb bond paper.
Paper Tray 2 holds:
• Letter
• Legal
• ISO A4
• JIS B4
Paper Tray 3 and 4 hold:
• Letter
• Legal
• ISO A4
• ISO A3
• 11 x 17 in
• JIS B4
Adjustable paper size guides for each of the media listed are located
inside the paper trays. See Tables 5-1 and 5-2 earlier in this chapter for
media selection and use guidelines.
When all trays have the same type and size media loaded, by default the
mopier prints from paper sources in the following order:
1. Tray 1
2. Tray 4
3. Tray 2
4. Tray 3
For example, assume all paper sources contain the same size of paper. If
you have specified Tray 1 or Automatic, send a print request to the
mopier, and Tray 1 is empty, the mopier prints from Tray 4. If Tray 4 is
also empty, the mopier prints from Tray 2, and then from Tray 3.
5
Print Tasks
EN Print Tasks 5-7