Filter
Top Products
Printer and mopier management software is available for the following
operating environments through your Hewlett-Packard distributor or
through electronic BBS channels:
• UNIX (HP-UX 9.x/10.x, Sun OS 4.1.3/4.1.4, or Solaris
2.2/2.3/2.4/2.5)
• Microsoft LAN Manager
Note To learn more about HP JetAdmin for the HP LaserJet 5Si Mopier, see
the HP JetDirect Print Server Software Installation Guide.
HP Print Server NLM
The Mopier Printing System includes Hewlett-Packard’s print server
network loadable module (NLM), which runs on NetWare 3.x and 4.x
file servers. It allows a network administrator to manage and control a
peripheral attached to a parallel port on a NetWare file server. HP’s
Print Server NLM (JETPS.NLM) can be used as a replacement for
Novell’s PSERVER.NLM. It services print queues on one or more file
servers and provides the same NetWare printing functionality as HP’s
JetDirect products. To run the Print Server NLM, HP JetAdmin must
also be installed.
Macintosh Utilities
The Macintosh software partition on the Mopier Printing System CD is
only accessible from Macintosh systems.
• HP LaserJet Utility
The HP LaserJet Utility allows the network administrator to configure
many mopier features from the computer. This is especially helpful in a
network environment when the mopier is not near your desktop. With
this utility you can:
• Name the mopier, assign it to a zone on your network, download
files and fonts, and change many of the default settings.
• Permanently download fonts to the mopier’s hard disk.
• Monitor the status of networked mopiers and printers.
• Lock the mopier control panel and set a password without leaving
your computer.
• Bitmapped Screen Fonts
The bitmapped screen fonts match your mopier’s 35 internal PostScript
fonts, allowing you to see on screen how your printed page will look.
3-8 Mopier Software EN