Filter
Top Products
Clearing the Mailbox with Stapler
1 Turn off the mopier and remove the Left Output Bin.
2 Refer to (A) in Figure 7-9 and clear paper from the jammed area by
carefully pulling it out, away from the mopier.
3 Pull the mailbox away from the mopier and check the area illustrated
in (B). Carefully remove all scraps.
4 Also check the fuser area, illustrated in (C).
Note After removing a sheet of paper you may need to check other areas to
ensure that all paper has been removed. Whenever a sheet of jammed
paper becomes badly shredded, it is a good idea to carefully piece all
parts together to be sure you have not overlooked some small part. All
portions of a jammed piece of paper must be removed or you may run
into repeated jams.
Mailbox with Stapler
A. Mailbox output area
B. Mailbox input area
C. Fuser area jam
B
C
A
Figure 7-9
7
Maintenance &
Troubleshooting
EN Maintenance and Troubleshooting 7-31