Filter
Top Products
Adjusting the Paper Stop
The paper stop (shown in Figure 5-3) is located near the Top Output
Bin. It can be adjusted to help paper lay flat as it exits the mopier. The
paper stop does not have to be raised for Letter or A4 size media. Note
that the mopier jams if the paper stop is set to a smaller size of media
than is being printed.
1 Pull the left side of the paper stop up until the stop is in an upright position.
2 Slide the paper stop to the mark indicating the largest paper size to be
printed.
Figure 5-3 Adjustable Paper Stop
5-26 Print Tasks EN