Filter
Top Products
C
Memory and Personality SIMM
Installation
Your HP LaserJet 5Si Mopier has four single inline memory module
(SIMM) slots. One slot is occupied by a 8 MByte memory SIMM and
another slot is occupied by a SIMM holding Adobe’s PostScript Level 2
language. Therefore, there are two available slots that you can use to
install additional printer memory and printer personalities.
The mopier contains 12 MBytes of installed memory. By adding
optional SIMMs with 2, 4, 8, 16, or 32 MBytes, you can increase
memory to a total of 76 MBytes.
Note Memory SIMMs for the HP LaserJet 4 Plus and 4M Plus printers can be
used in the HP LaserJet 5Si Mopier. PostScript language SIMMs for any
other printer cannot be used in the HP LaserJet 5Si Mopiers.
When you get a new memory board, compare the part number on the
outside of the package to the part number in Table C-1 below. If you
have not received the correct SIMM, notify your authorized
Hewlett-Packard dealer.
Table C-1 Memory SIMM Part Numbers
Size Part Number
2 MBytes C3131A
4 MBytes C3132A
8 MBytes C3133A
16 MBytes C3146A
Note 32-MByte SIMMs are not available from HP. The 32-MByte SIMMs are
supported, but must be obtained through third-party providers.
EN Memory and Personality SIMM Installation C-1