Filter
Top Products
Changing Paper Type from the Control Panel
1 Press [Menus] repeatedly until TRAY MENU appears.
2 Press [Items] repeatedly to scroll through the trays and their types.
Note Tray 1 and the optional Envelope Feeder do not have a sensor for
identifying paper size. If either is being used, you will also have a menu
item for media size. You must set the size of the paper loaded before
continuing. Paper sizes for Trays 2, 3, and 4 are automatically sensed.
3 Press [+] repeatedly to scroll through the paper type or size options.
4 Press [Select]*] to save your choice.
Selecting media by type rather than source is similar to locking out the
tray(s), which is a feature of previous HP LaserJet printers. If you have
letterhead loaded in Tray 1, and you select to print on plain paper in
your driver, the mopier will not pull the letterhead paper from Tray 1.
However, the mopier will pull from either of the other trays if plain
paper is loaded, and has been set on the mopier control panel.
Job Control Menu
The Job Control Menu is used to cancel a current job or to eject data that
has been sent to the mopier. The CANCEL JOB option will cancel the job
from the mopier control panel. The FORMFEED option is useful when the
data light is on, but nothing is printing out. This situation occurs when
the application has not told the mopier when it’s done sending data.
Table 4-6 presents the messages that appear when you select each of the
menu items.
Table 4-6 Job Control Menu
Menu Item Explanation
JOB CONTROL MENU CANCEL JOB
Press [Select]*]. STOPPING CHECK LAST PAGE
appears until the last page currently being printed
is placed in the output bin. PRESS SELECT TO
CANCEL JOB is displayed. If you press [Select]*]
again, CANCELING JOB appears until the entire print
job is removed or deleted. To ignore job
cancellation, press [On]Line].
PRESS SELECT TO
FORMFEED
FORMFEEDING is displayed. The online indicator
flashes until the page is delivered to the output bin.
4
Mopier
Control Panel
EN Mopier Control Panel 4-9