Filter
Top Products
Selecting the Left Output Bin
The Left Output Bin should be used for envelopes, transparencies, and
labels. Using this bin helps reduce paper curl.
Selecting the Left Output Bin through the Software
You can select an output bin through your software application or
mopier driver, or from the mopier control panel. You will probably
prefer to designate the paper destination in your software or mopier
driver. Otherwise, follow the instructions below for setting the Left
Output Bin as the mopier’s default output bin.
Note Where and how you make selections depends on your software
application or associated mopier driver. The selection process may be
available only from within the mopier driver. See Chapter 3 or your
application manual for more information.
Selecting the Left Output Bin from the Control Panel
1 Press [Menus] repeatedly until CONFIGURATION MENU appears.
2 Press [Items] repeatedly until PAPER DESTINATION=TOP OUTPUT
BIN * appears.
3 Press [+] repeatedly until OPTIONAL OUTPUT BIN 1 or bin name
assigned to it by the Network Administrator appears.
4 Press [Select]*] to save your choice. An asterisk (*) appears next to
your selection.
5
Print Tasks
EN Print Tasks 5-25