Filter
Top Products
Table 7-2 Mopier Messages,
continued
Message Description Recommended Action
CLEARING PAPER FROM
MOPIER
The mopier is attempting to
remove unusable paper (such as
after a paper jam)
No action required.
REMOVE PAPER FROM TOP
OUTPUT BIN
or
REMOVE PAPER FROM
OPTIONAL OUTBIN n
The destination output bin is full
and no more pages can be sent to
that bin.
Remove the paper from the
indicated output bin.
INPUT DEVICE FEED PATH
OPEN
The 2000-sheet input tray (Tray 4)
is open.
Push Tray 4 into the mopier
until completely closed.
OUTPUT DEVICE DELIVERY
PATH OPEN
The output device is not properly
seated against the mopier or the
stapler lid is open.
Ensure the output device is
pushed flush against the side
of the mopier and close the
stapler lid.
STAPLE LIMIT REACHED The stapler’s 20-sheet limit has
been reached. Job is not stapled.
Send only print jobs of 20
pages or less to the stapler.
STAPLER SUPPLY OUT The stapler is out of staples. Job is
not stapled.
Load a new stapler cartridge.
CLEAR JAMMED STAPLE The stapler has not finished
correctly.
Clear the stapler jam and
resend job.
STAPLER ALIGN ERROR The paper is misaligned and
cannot be stapled.
Remove the paper from the
stapler and resend the job.
Continued on the next page.
7-38 Maintenance and Troubleshooting EN