Filter
Top Products
Key to Figure 4-4a
1. Printer Information lists mopier specific statistics.
Serial Number shows the serial number of the print engine.
Formatter Number shows the serial number of the formatter board.
Firmware Datecode is an eight-digit date (YYYYMMDD) of the
internal code.
Processor Revision shows the revision number of the firmware
processor.
Page Count shows the number of pages the mopier has printed.
Pages Since Last Power Cycle shows the number of pages the mopier
has printed since the last time it was turned off.
Pages Since Last Maintenance shows the number of pages the
mopier has printed since the time a maintenance kit was installed.
2. Installed Personalities and Options lists printer languages and all
accessories that are installed.
3. Error Log shows the number of errors currently in the error log and
the last three errors that occurred.
4. Memory shows the total amount of installed memory and indicates the
amount of available memory for PCL applications (such as font
downloading software). Information about the current I/O Buffering and
Resource Saving configuration appears here. If the mopier does not
have enough memory installed to enable these two features, the
amount of additional memory needed appears.
5. Security lists whether the control panel is locked, whether the control
panel has a security password, and if the hard disk has been
write-protected.
6. Paper Handling Options lists the installed paper handling
accessories. These accessories may include the Duplex Unit, optional
Envelope Feeder, 2000-Sheet Input Tray, or Mailbox with Stapler.
7. HP MIO information is reserved for the HP MIO and network statistics.
For some installed MIO options, this block of information can be as
long as 20 lines and three columns.
4
Mopier
Control Panel
EN Mopier Control Panel 4-13