Filter
Top Products
3 Print custom-size paper from Tray 1.
See “Loading Media into Tray 1”
earlier in this chapter for the
procedure.
4 The edge of the paper feeding into the
mopier must be at least 3.9 in (99
mm) wide to allow rollers inside the
mopier to grab the paper. Measuring
from the leading edge to the trailing
edge of the paper going into the
mopier, the length dimension must be
at least 7.5 in (190 mm).
Note
You may use two-sided printing on paper
sizes equal to or larger than Executive.
Printing Bleeds
Since the mopier has the ability to print
on specially cut paper up to 11.7 x 17.7 in
(297 x 450 mm), you can print up to 11 x
17 in (279 x 432 mm) bleed images with
crop marks. Refer to your software
application or online help.
3
4
3.9"/
99 mm
7.5"/ 190 mm
5-32 Print Tasks EN