Filter
Top Products
• Do not overload the tray or ADF. For more information, see Load paper or Load an original in the automatic
document feeder (ADF).
• To prevent jams, poor print quality, and other printing problems, avoid loading the following paper in the
trays or ADF:
◦ Multipart forms
◦ Media that is damaged, curled, or wrinkled
◦ Media with cutouts or perforations
◦ Media that is heavily textured, embossed, or does not accept ink well
◦ Media that is too lightweight or stretches easily
◦ Media that contains staples or clips
Load an original on the scanner glass
You can copy, scan, or fax originals by loading them on the scanner glass.
NOTE: 1 Many of the special features do not work correctly if the scanner glass and lid backing are not
clean. For more information, see
Maintain the printer.
NOTE: 2 Remove all originals from the document feeder tray before lifting the lid on the printer.
To load an original on the scanner glass
Use these steps to load an original on the scanner glass.
1. Lift the scanner lid.
2. Load your original print-side down as shown in the following illustration.
TIP: For more help on loading an original, refer to the engraved guides along the edge of the scanner
glass.
3. Close the lid.
Load an original in the automatic document feeder (ADF)
You can copy, scan, or fax a document by placing it in the automatic document feeder (ADF).
CAUTION: Do not load photos in the ADF; this might cause damage to your photos. Use only paper that is
supported by the printer. For more information, see
Tips for selecting and using paper.
NOTE: 1 Only single-sided documents can be scanned, copied, or faxed using the ADF. The ADF does not
support double-sided documents.
NOTE: 2 B-size documents cannot be scanned, copied, or faxed using the ADF.
Chapter 1
16 Get started