Filter
Top Products
Chapter 7 121
Configuring a Point-to-Point Node
Configure Node Mapping
Phone Number
Required if the link is a dial link. The field must be
blank if the target node is non-adjacent. Enter the
telephone number as a combination of decimal numbers
(0 through 9), dashes, and the following special
characters:
/ Separator used for automatic call units
that have second dial-tone detect.
E Optional end-of-number indicator.
D Three-second delay (used for European
modems and automatic call units that
require built-in delays).
# Defined by local phone system.
* Defined by local phone system.
To disable outbound dialing, enter an exclamation point
(!) by itself in the phone number field.
Each router NI can have up to 1024 mappings.
However, 4096 is the absolute maximum number of
unique phone numbers supported per NMCONFIG File.
Security String
An optional security string that remote nodes must use
to gain dial link access to the node. It can be up to eight
alphanumeric characters, left justified, with no
embedded blanks. The first character must be
alphabetic.
Disable Route
Y (yes) or N (no) indicator that allows you to temporarily
disable a configured route. Leave the default (N) alone if
you do not want to disable the route.