Filter
Top Products
90 Chapter6
Configuring a LAN Node
Before using NMMGR to configure a link, you should complete the
worksheets provided. See Chapter 4 , “Planning for Node
Configuration,” for more information on planning your configuration
and filling out the configuration worksheets.
This chapter includes step-by-step instructions to help you perform the
following tasks:
• Begin the configuration process.
• Configure a LAN, Token Ring, FDDI, 100VG-AnyLAN, or 100Base-T
network interface.
Once the above tasks are completed, refer to Chapter 10 , “Validating
and Cross-Validating with SYSGEN,” for step-by-step instructions to
help you perform the following validation tasks:
• Validate the network transport configuration.
• Cross-validate in SYSGEN.