Filter
Top Products
Chapter 13 185
Configuring Logging
Enable Users for Individual Logging Classes
Step 2. To enable console logging for this subsystem logging class, enter a Y in
the Enable console logging? field. To disable console logging, enter
an N. Be aware that changing the value in this field will override
the previous setting for the logging class you are configuring.
Step 3. To enable disk logging for this subsystem logging class, enter a Y in the
Enable disk logging? field. To disable console logging, enter an N. Be
aware that changing the value in this field will override the
previous setting for the logging class you are configuring.
Step 4. Enter up to three names, in the form user.account, in the Users
enabled for logging fields. If these fields already contain names it is
because user names were previously configured using this screen. If
less than three user names are configured, type the new user name in
an empty field. If all fields are used, type over one of the old user names
to replace it with the new user name. (Note that the user name you type
over will no longer be enabled to receive these logging messages.)
Step 5. Press the
[Save Data] function key to modify the data record.
Step 6. Press the
[Prior Screen] key to return to the screen from which you
accessed the Logging Configuration: Class Data screen.
Repeat the above procedure for each subsystem logging class for which
you want to enable users.
CAUTION
Enabling users to receive logging messages can strain system
resources. Hewlett-Packard recommends that you use this capability
sparingly and only for short periods of time.