Filter
Top Products
Chapter 5 81
Introductory Screens
Begin Configuration Process
Open Configuration File
The Open Configuration/Directory File screen (#1) in Figure 5-2 is the
first screen displayed when you run NMMGR.
Figure 5-2 Open Configuration/Directory File Screen
Follow the steps listed here to enter data for this screen. Refer to
“Fields” subsection for detailed information about each field on the
screen.
Step 1. Verify that the correct configuration file name, backup configuration file
name, and network directory file name are in the appropriate fields.
Step 2. If you have assigned a write access password, enter it in this field. If
you are not using the password feature, leave this field blank.
Step 3. Press the
[Open Config] key. If you are creating the configuration file for
the first time, NMMGR will ask you to verify creation. Press the
[Open Config] key again to continue.
Fields configuration file name
The only configuration file name the system recognizes
for use by the network subsystem is
NMCONFIG.PUB.SYS. You can, however, create or modify
a configuration file using a different name and save it
as an offline configuration file. You can use offline
configuration files as a means of creating and storing
configurations that you want to use in the future or
that you are preparing for use on a different system.