Filter
Top Products
64 Chapter4
Planning for Node Configuration
Node Worksheet Information
(FDDI Link name) FDDI Configuration This represents the FDDI card for
which you are configuring a link.
(100VG-AnyLAN
Link name)
LAN Configuration This represents the 100VG-AnyLAN
card for which you are configuring a
link.
(100Base-T Link
name)
LAN Configuration This represents the 100Base-T card
for which you are configuring a link.
(X.25 Link name) X.25 Configuration The name of the link used by X.25 iX
System Access. It must match the link
name configured during configuration
of the datacommunications and
terminal subsystem (DTS).
(Point-to-Point Link
name)
Point-to-Point Configuration This represents the PSI card for
which you are configuring a link.
Local node name Main The node name is the name by which
the HP e3000 computer is known in
the network. The format of a node
name is
nodename.domain.organization
where the total number of characters
is 50 or fewer, and each field contains
16 or fewer characters (alphanumeric,
underscore, or hyphens). The first
character of each field must be
alphabetic.
Local domain name NS Configuration The name of the system in ARPANET
standard format. It is composed of
labels, with each label separated by a
period. Labels must start with a letter
or digit and have as interior
characters only letters, digits,
hyphens(-), or underbars (_). There
may be any number of labels, but the
total length of the name, including
periods, is limited to 255 characters.
(If not using domain names for
network access, leave the local node
name in this field.)
Table 4-1 Configuration Worksheet Information
Field Screen Description