Filter
Top Products
14
Chapter 5 , “Introductory Screens,” provides step-by-step instructions
for configuring NMMGR introductory screens.
Chapter 6 , “Configuring a LAN Node,” provides step-by-step
instructions for configuring IEEE802.3/Ethernet LAN, token ring, and
Fiber Distributed Data Interface (FDDI) links.
Chapter 7 , “Configuring a Point-to-Point Node,” provides step-by-step
instructions for configuring Point-to-Point (router) links.
Chapter 8 , “Configuring a X.25 Node,” provides step-by-step
instructions for configuring X.25 links.
Chapter 9 , “Configuring a Gateway Half,” provides step-by-step
instructions for configuring the interface between two gateway halves.
Chapter 10 , “Validating and Cross-Validating with SYSGEN,” provides
step-by-step instructions for validating the network transport and
cross-validating with SYSGEN.
Chapter 11 , “Configuring the Network Directory,” provides step-by-step
instructions for configuring a network directory.
Chapter 12 , “Configuring Domain Name Files,” provides instructions
for configuring the domain name resolver.
Chapter 13 , “Configuring Logging,” provides step-by-step instructions
for configuring logging.
Chapter 14 , “Operating the Network,” shows you how to bring up and
shut down NS 3000 links and services.
Appendix A , “MPE/V to MPE/iX Migration,” provides general MPE/V
to MPE/iX migration information.
Appendix B , “NS X.25 Migration: NS 3000/V to NS 3000/iX,” provides
X.25-specific information on migration from a node running NS X.25
3000/V Link to a node that will be running NS 3000/iX release 2.0 or
later. Appendix C does not apply if an MPE V-based node s being used
as an X.25 server for NS 3000/XL-based machines.
Appendix C , “NS X.25 Migration: NS 3000/V PAD Access to NS
3000/iX,” tells how to migrate NS 3000/V versions of PAD access to
NS 3000/iX release 2.0 or later.
Glossary, contains terms applicable to the network configuration
process.