Filter
Top Products
Chapter 11 153
Configuring the Network Directory
Open Network Directory
Open Network Directory
The Open Configuration/Directory file screen (#1) in Figure 11-2 is the
first screen displayed when you run NMMGR.
Figure 11-2 Open Configuration/Directory File
Step 1. Verify that the correct network directory file name is in the Network
directory file name field.
Step 2. If you have assigned a write access password, enter it in this field. If
you are not using the password feature, leave this field blank.
Step 3. Press the
[Open Directry] key. If you are creating the file for the first
time, NMMGR will ask you to verify creation. Press the
[Open Directry]
key again to continue.
Fields Configuration file name
The only configuration file name the system recognizes
for use by the network subsystem is
NMCONFIG.PUB.SYS. You can, however, create or modify
a configuration file using a different name and save it
as an offline configuration file. You can use offline
configuration files as a means of creating and storing
configurations that you want to use in the future or
that you are preparing for use on a different system.