Filter
Top Products
Chapter 9 145
Configuring a Gateway Half
Configure a Gatehalf Network Interface
Phone Number
Telephone number of this gateway half’s partner
gateway half. Enter the telephone number as a
combination of decimal numbers (0 through 9), dashes,
and the following special characters:
/ Separator used for automatic call units
that have second dial-tone detect.
E Optional end-of-number indicator.
D Three-second delay (used for European
modems and automatic call units that
require built-in delays).
# Defined by local phone system.
* Defined by local phone system.
Spaces, and left and right parentheses ( ) are also
allowed.
To disable outbound dialing, enter an exclamation point
(!) by itself in the phone number field.
Security string
This is a string containing up to eight alphanumeric
characters, left justified, with no embedded blanks. The
first character must be alphabetic. A value in this field
is required if the remote (destination) node is an HP
node (dial ID protocol is used). Remote HP nodes must
use the security string to gain dial link access to the
node you are configuring.