Filter
Top Products
126 Chapter8
Configuring a X.25 Node
Before using NMMGR to configure a link, you should complete the
worksheets provided. See Chapter 4 , “Planning for Node
Configuration,” for more information on planning your configuration
and filling out the configuration worksheets.
This chapter includes step-by-step instructions to help you perform the
following tasks:
• Begin the configuration process.
• Configure an X.25 network interface.
• Configure neighbor gateways.
Once the above tasks are completed, refer to Chapter 10 , “Validating
and Cross-Validating with SYSGEN,” for step-by-step instructions to
help you perform the following validation tasks:
• Validate the network transport configuration.
• Cross-validate in SYSGEN.
NOTE
If you are configuring X.25 iX System Access on a system that is using
host-based network management (a PC running the HP OpenView
Network Manager is not part of the network), use Configuring and
Managing Host-Based X.25 Links instead of this manual for
step-by-step configuration instructions.