Filter
Top Products
Chapter 5 87
Introductory Screens
Begin Configuration Process
Perform Guided Network Transport Configuration
The Network Transport Configuration screen (#42) in Figure 5-5 is
displayed if you press the
[Guided Config] key at the NS Configuration
screen (#166) in Figure 5-4.
Figure 5-5 Network Transport Configuration Screen
Step 1. Next to the words Enter a network interface:, enter a name for the
selected network interface (for example, LANNI).
Step 2. Next to the words Enter a network type:, enter the selected network
type number indicated on the above screen. (For example, enter a 1 to
indicate that the NI is a LAN NI.)
Step 3. Press the
[Config Network] key. (There may be a short pause before the
next screen appears.)
Step 4. Proceed to the chapter of the network interface selected above for
screen information. Refer to Chapter 6 , “Configuring a LAN Node,” for
information on LAN, Token Ring, FDDI, 100VG-AnyLAN, and
100Base-T; and other chapters for information on Point-to-Point, X.25,
and Gateway Half respectively.