Filter
Top Products
Chapter 11 155
Configuring the Network Directory
Select Update Directory Function
Select Update Directory Function
The Network Directory Main screen (#8) in Figure 11-3 is displayed
when you press the
[Open Directry] function key at the Open
Configuration/Directory File screen (#1) in Figure 11-2. This screen is
also displayed if a network directory has already been opened and you
type NETDIR in the command window of any screen and press the
[Enter]
key.
Figure 11-3 Network Directory Main
Step 1. Press the
[Update Dir] function key to modify the contents of the
directory by adding, deleting and updating node names and path
reports.
Function Keys This screen is the main select screen from which all directory functions
are accessed. The currently opened directory is displayed at the bottom
of all network directory screens. The percentage of the network
directory that is full is shown in the lower right corner of the screen.
Update Dir Press this function key to go to the Network Directory
Select Node Name screen to add, delete, or modify
network directory node name entries and path reports.
Print Dir Press this function key to print out a copy of the
directory to formal designator FORMLIST, device class
LP. You can use a file equation for FORMLIST to redirect