Filter
Top Products
89
6 Configuring a LAN Node
This chapter provides step-by-step instructions for configuring local
area network (LAN), Token Ring, Fiber Distributed Data Interface
(FDDI), 100VG-AnyLAN, and 100Base-T links. This manual assumes
that you are using the guided configuration capabilities of NMMGR.
Figure 6-1 shows the screen flow for configuring LAN, Token Ring,
FDDI, 100VG-AnyLAN, and 100Base-T screens. Screens unique to the
configuration of LAN, Token Ring, FDDI, 100VG-AnyLAN and
100Base-T are indicated by bold boxed screens.
[FUNCTION] denotes the
function key used at a screen to invoke the next screen on the screen
flow.
Figure 6-1 Configuring Screen Flow
Open Config/
Directory File Screen
Main Screen
NS Config
Link Selection
Neighbor Gateway
Reachable Networks
Network Transport
Config
[OPEN CONFIG]
[NS]
[GUIDED]
[NEIGHBOR GATEWAY]
[ADD or MODIFY]
If you have not created the
config file, then press the
OPEN CONFIG key a second
time.
[CONFIG NETWORK]
Neighbor Gateways
Link Selection
(Network Interface)
Config
Enter Network Interface:
LAN, Token Ring or FDDI
[VALIDATE NETXPORT]
Validate Link,
Cross-validate
with SYSGEN