Filter
Top Products
Chapter 11 163
Configuring the Network Directory
Configure Path Report Data for a Node
Additional address
A lower-level address, which depends on the type.
Type 1 does not contain lower-level addressing
information. You can leave the field blank, or enter the
keyword NONE.
Types 2, 5, 6, and 7 require the destination node’s
station address, which is a string of six hexadecimal
bytes, separated by dashes (XX-XX-XX-XX-XX-XX). The
station address must correspond to the address
configured on the remote node.
Type 3 requires an X.25 address key, which is an ASCII
string of up to 15 characters. The X.25 address key
must correspond to an X.25 address key entered in the
NETXPORT.NI.
NIname
.PROTOCOL.X25.SVPATH or the
NETXPORT.NI.
NIname
.PROTOCOL.X25.PVCPATH screen
for the destination node.