Filter
Top Products
61
4 Planning for Node Configuration
This chapter describes how to complete node worksheets before you
start configuration. You will need to collect some information ahead of
time to complete these tasks.
The main purpose of the node worksheets is to determine the
information you will need to configure for each node during NMMGR’s
guided configuration. This information depends on the type of network
you have. For a description of the fields in these worksheets, see
Chapter 6 , “Configuring a LAN Node,” for information on LAN, Token
Ring, and FDDI, and Chapter 7 , “Configuring a Point-to-Point Node,”
for information on Point-to-Point and Chapter 8 , “Configuring a X.25
Node,” for information on X.25.
It is recommended that you make copies of these worksheets and fill in
the parameter information, then use these worksheets to guide you
through configuration in NMMGR.
Node worksheets list only the fields you can configure during guided
configuration, which allows you to configure your nodes as quickly as
possible. For information on configuration parameters that are
available through non-guided configuration, see the NS 3000/iX
NMMGR Screens Reference Manual.
This chapter includes:
• Node worksheet information.
— Node worksheet information.
— Token Ring configuration worksheet
— FDDI configuration worksheet.
— 100VG-AnyLAN configuration worksheet.
— 100Base-T configuration worksheet.
— Point-to-Point configuration worksheet.
— X.25 configuration worksheet.
— X.25 virtual circuit configuration worksheet.
• Neighbor gateway worksheet information.
— Neighbor gateway configuration worksheet.
• Neighbor gateway reachable networks worksheet Information.
— Neighbor gateway reachable networks configuration worksheet.