Filter
Top Products
Chapter 13 173
Configuring Logging
Access Logging Configuration Screens
Access Logging Configuration Screens
Use the following steps to reach the logging configuration screens:
Step 1. Run NMMGR. The Open Configuration/Directory File screen is
displayed.
Step 2. Press the [OPEN CONFIG] key. The Main screen is dispayed.
Step 3. Press the
[NS] function key. The NS Configuration screen is displayed.
Step 4. Press either the
[Guided Config] or the [Unguided Config] function key.
Step 5. Press the
[Modify Logging] function key if you are in guided
configuration or the
[Go To Logging] function key if you are in unguided
configuration. The first of seven logging configuration screens is
displayed.
NOTE
HP recommends that you use the default logging configuration values
unless your HP representative tells you otherwise. Not using the
recommended default values may result in the degradation of system
performance.