Filter
Top Products
125
8 Configuring a X.25 Node
This chapter provides step-by-step instructions for configuring X.25 iX
System Access for systems using PC-based network management. This
manual assumes that you are using the guided configuration
capabilities of NMMGR.
Figure 8-1 shows the screen flow for configuring X.25 screens. Screens
unique to X.25 configuration are indicated by bold boxed screens.
[FUNCTION] denotes the function key used at a screen to invoke the next
screen on the screen flow.
Figure 8-1 X.25 Link Screen Flow
Open Config/
Directory File Screen
Main Screen
NS Config
Link Selection
Neighbor Gateway
Reachable Networks
Network Transport
Config
[OPEN CONFIG]
[NS]
[NEIGHBOR GATEWAY]
[ADD or MODIFY]
If you have not created
the config file, then
press the OPEN
CONFIG key a second
time.
[CONFIG NETWORK]
X.25 Virtual Circuit
Config
Link Selection
X.25 Configuration
[VALIDATE NETXPORT]
Validate Link,
Cross-validate
with SYSGEN
[GUIDED CONFIG]
Neighbor Gateways
[NEIGHBOR
GATEWAYS]