Filter
Top Products
Installation and Initial Configuration 1-39
Machine- and Product-Specific Parameter Guidelines
Machine- and Product-Specific Parameter Guidelines
Because your machine or product environment might not support these
parameters, they do not appear on the configuration worksheet. DB-Monitor
does not prompt for any of these values during initialization.
DYNSHMSZ
The DYNSHMSZ parameter affects your OnLine configuration only if you
plan to use OnLine with the
IBM Informix TP/XA library product. The default
value for DYNSHMSZ is 0. After you initialize OnLine, you can modify the
value as required by your environment. Refer to the IBM Informix TP/XA
product documentation for information about setting this parameter.
GTRID_CMP_SZ
The GTRID_CMP_SZ parameter affects your OnLine configuration only if you
are planning to use OnLine with the IBM Informix TP/XA library product.
The default value for GTRID_CMP_SZ is 32 bytes. After you initialize OnLine,
you can modify the value as required by your environment. Refer to the
IBM Informix TP/XA product documentation for information about setting
this parameter.
DEADLOCK_TIMEOUT
The DEADLOCK_TIMEOUT parameteraffects your OnLineconfiguration only
if you are planning to use OnLine with IBM Informix STAR. Refer to page 9-57
for information about using OnLine in a client/server environment.
TXTIMEOUT
The TXTIMEOUT parameter affects your OnLine configuration only if you are
planning to use OnLine with IBM Informix STAR. Refer to page 9-57 for infor-
mation about using OnLine in a client/server environment.