Filter
Top Products
1-52 IBM Informix OnLine Database Server Administrator’s Guide
Enter Your Configuration and Initialize OnLine
The disk parameters initialization screen appears. Some fields contain
default values. The following screen representation replaces the default
values in each field with the name of the OnLine configuration parameter
associated with that field:
To initialize OnLine, enter the values for the disk parameters and use your
worksheet as reference.
As you enter values, the last line in the screen changes dynamically,
depending on your cursor location. The last line always contains a brief
explanation of the value you should enter in the current field. If you press F2
or CTRL-F, additional help messages appear that pertain to the field where
your cursor is located.
At any time during the initial configuration setup, you can press the Interrupt
key to abort your changes and return to the Parameters menu options.
After you complete this disk parameters screen, press ESC to record the
values entered. Automatically, the shared-memory parameters screen
appears.
INITIALIZATION: Make desired changes and press ESC to record changes.
Press Interrupt to abort changes. Press F2 or CTRL-F for field-level
help.
DISK PARAMETERS
Page Size [BUFFSIZE ] Kbytes Mirror [MIRROR ]
Sys. Log File [MSGPATH ]
System Msgs. [CONSOLE ]
Tape Dev. [TAPEDEV ]
Block Size [TAPEBLK ] Kbytes Total Tape Size [TAPESIZE ] Kbytes
Log Tape Dev. [LTAPEDEV ]
Block Size [LTAPEBLK ] Kbytes Total Tape Size [LTAPESIZE ] Kbytes
Root Name [ROOTNAME ] Root Size [ROOTSIZE] Kbytes
Primary Path [ROOTPATH ]
Offset [ROOTOFFSET ] Kbytes
Mirror Path [MIRRORPATH ]
Offset [MIRROROFFSET ] Kbytes
Phy. Log Size [PHYSFILE ] Kbytes Log. Log Size [LOGSIZE ] Kbytes
Number of Logical Logs [LOGFILES ]