Intermate100 and Intermate101 Print Server Administration Manual 14
Introduction: Topics in This Manual
1.4.4. About Configuring the “Basic” and “Permission” Sub-
Groups
The chapters in this main section are organized according to
configuration pages in the HTTP-based menu.
The HTTP-based menu is divided into four groups:
• Actions
• Configurations
•Status
•Help
Within the “Configurations” group on the menu, there are a
number of sub-groups. Each sub-group has a number of con-
figuration pages. Each chapter title in [Square Brackets] indi-
cates a configuration page.
The order in which these pages are presented reflects a typical
order for first time use. This may differ from the order on the
HTTP menu, where the least frequently used pages are at the
bottom of the “Configurations” group.
The “Basic” sub-group has three configuration pages
•
“[TCP/IP]” [page 103]
Besides IP address, subnet mask, default gateway, and host
name (covered in Chapter 12), the [TCP/IP] page allows you
to specify a WINS server to which this information will be sent.
It also allows you to register the IP address of a DNS server on
which the unit can look up the addresses of named servers on
other configuration pages.
•
“[General]” [page 106]
This configuration page includes a number of purely
administrative parameters: What will you call the device,
who is responsible for it and where it is located?
It also includes a parameter to designate the “System Target
Printer”, which is where information about the system is
printed; and there is a parameter defining whether or not front
panel messages should be enabled on that printer.