Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 18
Introduction: Topics in This Manual
Socket by defining different TCP ports, and you can define
up to eight LPR queues. So in all, you can configure 15
services on these five configuration pages.
You must, of course, also establish printer definitions which
can use these services. How to do this is covered in all
relevant chapters explaining the supported printing
environments.
• “TN5250E Option” Sub-Group is covered in the
Printing Environment Guide for IBM OS/400 Systems.
• “TN3270E Option” Sub-Group is covered in the
Printing Environment Guide for IBM Mainframe Hosts.
• “IPDS Option” Sub-Group is covered fully in each of
the separate IBM Printing Environment Guides.
Note that printer definitions for IPDS under OS/2 and
AIX are covered in this manual; use the guide for IBM
Mainframe Hosts to configure IPDS in the print server.
• “Novell Netware” Sub-Group, for support of
IPX/SPX-based printing in NDS and Bindery modes, is
covered in a Printing Environment Guide published in
December 2001. This feature is only available on
Intermate100s sold before 4 January 2002, up to and
including code level G22_1491.
1.4.6. “Other Configurations”
The sub-group “Other Configurations” is found in the
Intermate101-JScribe model (G34). Consult CCP’s manual for
information on these possibilities.
Note that JScribe must always be run through the logical
printer layer.