Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 186
Configure [SNMP]: Load and Edit “Options” (Parameters)
To edit the Intermate1xx parameters
7
On the HP OpenView main screen choose “Control >
SNMP Manager... > Define Query...”. This opens the dialog
box for defining queries. Note that the parameters will be
called “variables”.
8 Select the variables to view and add them to the “Selected”
list. The Intermate1xx-“option” variables are found by
clicking “iso > org > dod > internet > private > enterprises >
intermate > imaPs1”. This brings up a list of all available
“option groups” (each corresponding to a configuration
page). Double-clicking an “option group” name accesses
the variables contained in that group. Select the variables
or groups to be viewed. Use the “Add ->” button to add
single variables or entire groups to the list.
Finish by pressing the “Perform” button.
Example: The figure below shows the variables found in
the “General” option group (= the parameters found on the
[General] configuration page in the print server’s HTML
dialog).
9 Edit the variables.
10 Click the “Close” button to finish.