Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 242
Configuration Checklists: Overall Checklist
• If you enable NDO, configure up to four network
printers / network destinations and make sure that you
do not enable power detection on “Output Control >
[Local Printer Parallel Port]”.
8 Configure logical printers as needed (see below, step
3
,
page 243
).
9 If you wish, configure one or more status monitoring aids.
You can choose from among e-mail, notification, SNMP and
enabling of the embedded IMCU agent.
10 Configure the services you want to use from among the
following possibilities—and use the
“Checklist for Each
Service or Host Session” [page 243]
for each:
• Raw Socket TCP Port (up to 4)
• LPR queue (up to 8 configurable queues; there are also
4 non-configurable queues)
• FTP
• IPP (Internet Printing Protocol)
• ThinPrint
• IPDS (host-session)
• TN5250E (host-sessions - up to 4)
• TN3270E (host-session)
11 Remember that it is necessary to reboot in order to activate
new settings.
12 It is always a good idea to document your configurations by
printing the Main Status Pages.