Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 166
Services in “Input Control”: ThinPrint
22.6. ThinPrint
Introduction
Starting with release level 2171, ThinPrint is available in all
print servers.
For a number of printers that are popular with ThinPrint users,
a Centronics extension cable or a Mini-Centronics extension
cable may be necessary in order to connect the Intermate1xx
to the printer.
The terminology which we use (starting in
“Processing Layers”
[page 123]
) needs to be adjusted if you want to understand how
the Intermate1xx and ThinPrint work together. The term “RDP
or WTSC” on the figure below (left) refers to the fact that either
a Citrix Client (RDP, not ICA) or a Windows Terminal Services
Client can be used.
The [ThinPrint] configuration page in the Intermate1xx:
a Enable the option.
b Set a “Client TCP Port” for the Intermate1xx to
listen on.
This will be a TCP/IP port on the ThinPrint
server (TCP/IP is the default print protocol for
new ports). Consult your ThinPrint manual to
see if you need a different port number setting
than the default (4000) for your ThinPrint setup
and printing environment.
Service Protocol
Our ThinPrint protocol receives the job as a
client to the ThinPrint Server
ThinPrint
Server
Printer request
system
Logical
Printer
Target
Printer
HPO
RDP or WTSC