Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 159
Services in “Input Control”: Common Feature: How to Direct Output
22. Services in “Input Control”
This chapter covers configurations for Raw Socket, LPR, FTP
Print, IPP, and ThinPrint.
22.1. Common Feature: How to Direct Output
Each service you configure must include a setting for how to
direct output to a physical “Target Printer”. On print servers
running release level 2111 or higher, the parameter is called
“Output to”. On older releases the parameter is called “Use
Logical Printer”.
Basics The default setting is always “Logical Printer 0" which will print
to the
“System Target Printer” [page 108]
. If you are not using
the Network Destination Option (NDO), the system target
printer will always be the local printer where the print server is
attached. For many purposes, you can just leave the output
setting at the default value of Logical Printer 0.
Advanced
Settings
The other possible settings are Logical Printer 1 - Logical
Printer 8, inclusive. If you choose one of them, be sure that any
pre-processing, post-processing or string substitution are cor-
rect for the jobs you will be sending with this protocol and that
the output from the logical printer will end up on the desired tar-
get printer.
NDO NDO users who want to have output directed to a physical
printer without engaging the logical layer have five additional
choices: Local Printer, and Network Destination 1 - Network
Destination 4, inclusive.
ThinPrint Please see the expanded information (
page 166
) on how to
direct ThinPrint output to different printers.
More
informa-
tion
If you need help to understand how output is directed, please
consult the chapter on
“Processing Facilities”
, especially the
sections
“Use Logical Printer/Output To” [page 124]
and
“The
Configurable Logical Printers 1-8” [page 125]
. Configuration tips
for the various services may also be helpful.