Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 88
IP Assignments for Initial Contact: Introduction
12. IP Assignments for Initial Contact
12.1. Introduction
You must change the IP address from the factory default
(0.0.0.0). Additional IP settings that may need configuration
are the Subnet Mask (default 255.255.255.0) and the Gateway
address (default 0.0.0.0). Note that the Intermate1xx supports
classless routing.
The methods available for setting the IP address vary depend-
ing on how your LAN environment is administered. When we
discuss choosing a method, we are talking about the adminis-
tration, and not the print platforms you will be using.
In fact, some of these platforms, notably IBM Mainframes
(such as S/390) and Mid-Range (such as AS/400) have no
management facilities of this type. This is no cause for con-
cern. Most LANs are administered from a Windows work sta-
tion, an OS/2 work station or a work station running UNIX, AIX
or Novell Netware.