Filter
Top Products
Intermate100 and Intermate101 Print Server Administration Manual 230
Technical Information: Hardware
Complete information on the LED Patterns and TEST Button is
in the appendix
“Information from LEDs and from the TEST But-
ton” [page 234]
.
On the bottom of the box is a label containing the following
information:
• Electromagnetic compliance. The label refers to this
manual for further information; please see
“USA: FCC
Rules Part 15, Class A” [page 232]
and
“EU: EMC, CE
Declaration of Conformity” [page 232]
.
• Description of requirements for the power supply—in
case you should need to replace the supply provided
with the unit.
• MAC Address (IEEE address; universal hardware
adapter address for IP network devices). This serves
as the serial number for your unit. If the label has been
damaged or is missing, attach the unit to a printer (see
“Hardware Installation” [page 233]
) and use the Status
Pages to find the MAC address.
Finally, the label tells you how to print the Status Pages (cur-
rent configuration information) and the Quick Guide (on-board
help; a mini-manual in txt format) by holding the TEST Button
in for less than 3 seconds or at least 4 seconds, respectively.
Before trying this, make sure that the unit reports Ready by
displaying the green light—and only that light.
The package includes a power cable.
You will need a LAN drop cable, which is not included.
You can purchase Centronics and Mini-Centronics extension
cables from us.