Filter
Top Products
AI296 Version 9.8x User’s Guide
Link Configuration: LAPB Parameters Configuration
6-48
Link Type Availability
MLT and X.25
Configuration in the AI198 Menu System
1. Access menu 4.2.11.12.8 for MLT or menu 4.2.11.12.7 for X.25.
2. For
02*Frame level disconnect, enter 2 to select Active, Passive or Other. The default
is
Active.
3. For
03 Frame Window size, enter 3, and the window size. The default is 7.
This example displays
02*Frame level disconnect set to Passive and 03 Frame Window
size
set to 4.
Configuration in the AI296 Local Menu System
1. Access the MLT or X.25 Link Menu.
2. Select
LAPB Menu or X.25 LAPB Menu. The MLT LAPB Menu or X.25 LAPB Menu
appears.
3. For
Frame Level Disconnect, select Active, Passive, or Other. The default is Active.
4. For
Frame Window Size, enter the window size. The default is 7.
This example displays
Frame Level Disconnect set to Passive and Frame Window Size set
to
4.
Interface Mode
Description
This menu item configures the interface mode as either DTE or DCE. DTE is used for
a communications device (typically a terminal or computer) that is the source or
destination of signals on a network. DCE is used for a device (typically the modem)
that establishes, maintains, and terminates a session on a network. It may also
convert signals for transmission.
>3 4
Menu 4.2.11.12.7
01*Interface mode (DTE or DCE)----------------------------------------------DCE
02*Frame level disconnect (Active, Passive, Other)----------------------Passive
03 Frame Window size (1 - 7)--------------------------------------------------4
X.25 LAPB Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 02
Frame Level Disconnect . . . . . . . . . . . Active [Passive] Other
Frame Window Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4