Filter
Top Products
AI296 Version 9.8x User’s Guide
TID Multiplexing: TID Multiplexing Configuration
7-4
TID Multiplexing Configuration
Establish TID multiplexing by configuring aliases for calls that will go through AI296.
Configure a parent alias to accept the incoming call from the OSS. After doing this,
configure children aliases to route calls to the various network elements. For more
information about aliases, refer to Chapter 8: Alias and Call Routing Configuration
.
Configuring the Parent Alias
Note: Kentrox recommends that you do not use connect-on-activity PVCs to
establish a parent connection.
Configuration in the AI198 Menu System
1. Log in to AI198.
2. At the prompt, enter
menu to access the Main Menu.
3. For
08+Configure the alias translation table, enter 8. The alias configuration
menu appears.
4. For
01 Alias name, enter the alias name for the call coming from the OSS.
>8
Menu 8
01 Alias name -****************************************************************
02+Simple alias translation
03 Destination -
04 Called address -
05 This alias is visible in the destination menu-----------------------------NO
06 Link number is (1..16) -
07 Caller's address -
08 Call data -
09 App. string -
10 Called protocol -
11 Caller's protocol -
12 Alternate routing alias -
14+Test macros
15 Show entire alias
16 Show the first entry in the alias translation table
17 Show the previous entry in the alias translation table
18 Show the next entry in the alias translation table
19+Delete the above alias translation entry
20 Save the changes made (20b: to the beginning, 20e: to the end)
21 Exit this menu with no changes
Enter item number and optional ",value" then push <CR> key
>