Filter
Top Products
AI296 Version 9.8x User’s Guide
AI296 Commands: timezone
9-110
timezone
Note: This command is only available when AI296 is in standalone mode.
Description
This command displays or changes the time zone or adjusts the time to reflect
daylight savings.
Command Type
shell
Formats
timezone
-dstoff [ { + | - }
hh
:
mm
]
-dston [ { + | - }
hh
:
mm
]
Parameters
Note: For +/-, enter the direction (+ = east) (- = west) of Universal Coordinated Time
(UTC) or Greenwich Mean Time.
The time entered here is the number of hours from UTC. For example, if the
desired location is in the Eastern Standard Time (EST) zone, enter -05:00 in
this field. This indicates a time 5 hours behind UTC.
-dston
Enables daylight savings time for AI296. The following parameters are
accepted:
z +—Specifies that the value is east of UTC.
z -—Specifies that the value is west of UTC.
z
hh
—Defines the number of hours from UTC (Universal Coordinated
Time or Greenwich Mean Time).
z
mm
—Defines the number of minutes from UTC (Universal
Coordinated Time or Greenwich Mean Time).
-dstoff
Disables daylight savings time for AI296. The following parameters are
accepted:
z +—Specifies that the value is east of UTC.
z -—Specifies that the value is west of UTC.
z
hh
—Defines the number of hours from UTC (Universal Coordinated
Time or Greenwich Mean Time).
z
mm
—Defines the number of minutes from UTC (Universal
Coordinated Time or Greenwich Mean Time).