Filter
Top Products
AI296 Version 9.8x User’s Guide
AI296 Commands: staslc
9-93
Examples
This example displays the link and cable status information for links 1 to 5.
Note: Not all links are displayed here. Entering the command with no additional
parameters would show all 16 links.
[296]staslc 1-5
Link Current status Speed Act Pmax Rx/CRC Rx/Abt Rx/Ovr Tx/Und Intf
1: +Asy Link n,8,1 9600 0 0 0 0 RS-232
2: +DCE -Dcd -Frm -Pkt 9600 0 128 0 0 0 0 RS-232
3: +DCE -Dcd -Frm -Pkt 9600 0 128 0 0 0 0 RS-232
4: +DCE -Dcd -Frm -Pkt 9600 0 128 0 0 0 0 RS-232
5: -DCE -Dcd -Frm -Pkt 9600 0 128 0 0 0 0 RS-232
[296]
Column Description
Link
Displays the number of the link.
Status
Displays the link status as dataxfer (data is being transfered),
idle, or disabled.
Appl.
Displays the application specified for the link (Alias, Login, or
Destination).
DTR RTS CTS DSR DCD
Displays the status of the control signals. (+ means the signal
is asserted and
- means the signal is negated.)
Format
Displays the baud rate, number of data bits, parity (none, odd,
or
even), and number of stop bits specified for the link.
Parity
Displays the number of parity errors.
Frame
Displays the number of framing errors.
Overun
Displays the number of overrun errors.
Underun
Displays the number of underrun errors.