Filter
Top Products
AI296 Version 9.8x User’s Guide
AI296 Commands: pad
9-69
pad
Description
This command calls an X.25 PAD host. It is used with the X.3, X.28 and X.29
protocols. Used with a link number, it calls the X.25 device connected to that link.
Without parameters, it enters the command mode.
Command Types
shell
Formats
pad
Note: There are several parameters available with this command. See the list below.
Parameters
break
Sends a break signal to host.
breakaction
Sets a breakaction.
breakin
Sets a PAD recall character.
call host
Sets up a connection to the named host.
clear
Closes the current connection.
echo
Enables/disables terminal echo.
emask
Sets the terminal echo mask to
n
.
flow
Enables/disables terminal flow control.
forward
Sets data forwarding conditions.
help
Displays help information.
hosts
Lists all the available hosts.
int
Sends an interrupt packet.
lfinsert
Sets line feed insertion action.
loghost
Displays X.29 messages.
message
Enables the message mode of operation.
native
Enables the native mode of operation.