Filter
Top Products
AI296 Version 9.8x User’s Guide
System Configuration: TACACS+ Configuration
4-19
3. For 02 Primary Server IP Address, enter 2, and the IP address. The default is
0.0.0.0.
4. For
03 Primary Server Port, enter 3, and the port number. The default is 49.
5. For
04 Primary Server Secret, enter 4, and the password. The default is applied.
6. Repeat steps 2 through 5 for the secondary server settings.
This example displays:
z 01*Primary Server Status set to ENABLED
z 02 Primary Server IP Address set to 050.023.156.011
z 03 Primary Server Port set to 122
z 04 Primary Server Secret set to hilltop.
Shell/FTP Options
Description
This item sets the Shell/FTP option for TACACS+ as one of the following:
z Enabled—Enables TACACS+ login.
z Disabled—Disables TACACS+ login.
z Local fallback—Enables TACACS+ login, but resorts to local login if the
TACACS+ login fails.
Note: RADIUS and TACACS+ cannot both be configured at the same time.
Attempting to do this generates an error.
Menu Item Type
Toggle
Configuration in the AI198 Menu System
Important: Configuration of the shell/FTP TACACS+ option results in privilege level
authorization and supersedes any TACACS+ configuration on the AI296
card.
To configure the shell/FTP TACACS+ option:
1. Access Menu 4.2.11-2.4.
>4,hilltop
Menu 4.2.11-2.4
01*Primary Server Status (Enabled, Disabled)--------------------------- ENABLED
02 Primary Server IP Address------------------------------------050.023.156.012
03 Primary Server Port (1..65535)-----------------------------------------00122
04 Primary Server Secret------------------------------- hilltop