Filter
Top Products
AI296 Version 9.8x User’s Guide
AI296 Commands: tftp
9-106
Parameters
Examples
This example displays the upload of file primary.cnf to file secondary.cnf on TFTP
server
10.34.6.13.
get
Downloads a file from the TFTP server. The following parameters are
accepted:
z
address
—Defines the IP address of the TFTP server to which the file
download will occur.
z
source_filename
—Defines the file to download from the TFTP server.
Note: The source file name cannot contain spaces or special
characters.
z
dest_filename
—Defines the name of the source file after it has been
downloaded from the server. If no destination file name is specified, the
file will have the same name as the source file.
Note: The destination file name cannot contain spaces or special
characters.
put
Uploads a file to the TFTP server. The following parameters are accepted:
z
address
—Defines the IP address of the TFTP server to which the file
upload will occur.
z
source_filename
—Defines the file to upload to the TFTP server.
Note: The source file name cannot contain spaces or special
characters.
z
dest_filename
—Defines the name of the source file after it has been
uploaded to the server. If no destination file name is specified, the file will
have the same name as the source file.
Note: The destination file name cannot contain spaces or special
characters.
[296] tftp put 10.34.6.13 primary.cnf secondary.cnf
File Uploaded successfully.
[296]