Filter
Top Products
AI296 Version 9.8x User’s Guide
AI296 Commands: arp
9-16
arp
Description
This command displays, deletes, or adds entries in the ARP cache.
Command Types
shell and winslc
Formats
For the shell:
arp
-a [
ip_address
]
-d
ip_address
-s
ip_address
mac_address
For the winslc command:
winslc
baseport
arp
-a [
ip_address
]
-d
ip_address
-s
ip_address
mac_address
Parameters
-a
Displays all entries in the ARP cache table or just the
ip_address
entry.
The following parameter is accepted:
ip_address
—Defines the IP address of the destination device in
dotted decimal format.
baseport
Defines the baseport number for AI296.
-d
Deletes an entry from the ARP cache table. The following parameter is
accepted:
ip_address
—Defines the IP address of the destination device in
dotted decimal format.
-s
Adds a permanent entry to the ARP cache for the current session.
Permanent entries must be in the same subnetwork as the IP address
of the destination device. The following parameters are accepted:
z
ip_address
—Defines the IP address of the destination device in
dotted decimal format.
z
mac_address
—Defines the MAC address of the destination device.