Filter
Top Products
AI296 Version 9.8x User’s Guide
Link Configuration: RTS/DTR Lead Control Configuration
6-72
This example displays 01*DTR connect state set to OFF and 02*DTR disconnect state set
to
TOGGLE.
Configuration in the AI296 Local Menu System
1. Access the Async Link Menu or AsyncPPP Link Menu.
2. Select
RTS/DTR Lead Control Options Menu. The RTS/DTR Lead Control Options
Menu appears.
3. For
DTR connect state, select On or Off. The default is On.
4. For
DTR disconnect state, select On, Off, or Toggle. The default is Off.
This example displays
DTR connect state set to Off and DTR disconnect state set to
Toggle.
RTS State Configuration
Description
RTS is an RS-232 signal that is sent from a transmitting terminal to a receiving
terminal to request permission to transmit. It is configured using the following menu
items:
RTS connect state—Sets the RTS connect state to one of the following options:
z On—Sets RTS to on when the link is connecting or connected.
z Off—Sets RTS to off when the link is connecting or connected.
z FlowControl—Enables RTS to follow the hardware flow control convention.
>2
Menu 4.2.11.12.13
01*DTR connect state---------------------------------------------------------ON
02*DTR disconnect state (On, Off, Toggle)--------------------------------TOGGLE
RTS/DTR Control Options Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 3
DTR connect state . . . . . . . . . . . . . . . . . . . . . . . On [Off]
DTR disconnect state . . . . . . . . . . . . . . . . . On Off [Toggle]