Kentrox AI296 Computer Hardware User Manual


 
AI296 Version 9.8x User’s Guide
Link Configuration: Virtual Circuit Configuration
6-89
This example displays:
z 01*PVC Type set to Connect
z 02 LCN Low set to 5
z 03 LCN High set to 15
z 04 INACTIVITY Timer Interval set to 240.
Configuration in the AI296 Local Menu System
1. Access the X.25 Link Menu.
2. Select
Quick X.25 Menu. The Quick X.25 Menu appears.
3. For
Number of PVCs, enter the number of PVCs to be configured. The default is 0.
4. For
SVC Low, enter a minimum SVC value that is higher than the number of PVCs.
Valid values are from
0 to 4095. The default is 1.
5. For
SVC High, enter a maximum SVC value that is higher than the minimum SVC
value. Valid values are from
0 to 4095. The default is 1.
6. Save your work.
7. From the Quick X.25 Menu, select
PVC Menu. The PVC Summary Menu appears.
8. For
Edit PVC, enter the number of the PVC to be edited. This value must be in the
range of configured PVCs. The PVC Edit Menu appears.
9. For
Low PVC, enter the minimum PVC value.
10. For
High PVC, enter the maximum PVC value.
11. For
PVC Type, select Passive, Active, or ConnectOnActivity. The default is Passive.
12. For
Timer Value, select the timer interval value.
Passive Reset Timer 0 s 0 s
>4,240
Menu 4.2.11.12.9.2.1
01*PVC Type (Passive, Active, Connect on activity)----------------------Connect
02 LCN Low (* for all LCNs for the link)-----------------------------------0005
03 LCN High----------------------------------------------------------------0015
04 INACTIVITY Timer Interval (seconds)------------------------------------00240
Table 6-1 PVC and Timer Type (Continued)
PVC Type Timer Type Range Default